columbia.jpgPump Columbia

High efficiency pump for indoor pools that offers silent operation and reliability at low temperatures, available from 1 to 3 HP, with single-phase or three-phase motor. Simple installation. The pre-filter cover opens easily. It has connections with standard recesses and the possibility of detaching the engine without affecting the hydraulic system of the pump.

victoria_plus.jpgPump Victoria Plus

Dynamic design with new generation, easy-to-operate lid. Low noise levels due to special rubber pads. Engine protection IP-55.

victoria_dual-1.jpgPump Victoria Dual Speed

The new Victoria double speed pump is characterized by noise reduction (by 75%) and energy savings (by 60%). High speed is used in backwash, rinse, chemical shocks, while low speed is used for filtering even at night (low noise factor) taking advantage of the lower cost of electricity. The Victoria Dual Speed ​​has exactly the same dimensions as the Victoria Plus (Doll) and Sprint.

With Terra 50 cartridge filter, 15m3 / h, with Sena 1.25HP pump, with 100W luminaire and with programmable control panel. One filter replaces the three used in Combo I. Improved water return to the pool. The Combo II can also be installed as a compact unit or can be installed as two separate parts.

diatomiki.jpgDiatomaceous earth filters, CEL series

Made of PP and fiberglass. With pressure gauge and ventilator. High filtration efficiency. Easy maintenance. 2 ”output (also provided with a 1 1/2” adapter). Filtration speed 6m3 / h / m2. Maximum operating pressure 2.5kg / cm2.

cantabric.jpgCast CANTABRIC filters from mold (2 parts)

In cream color. Shell from thermoplastic injection in two pieces. The top and bottom are thermally bonded. With pressure gauge and ventilator. Maximum filtration speed 50m3 / h / m2. Maximum operating pressure 2.5kg / cm2.

millenium.jpgMILLENNIUM filters from blown mold

In gray color. One-piece body made of blown plastic. Complete with manometer, ventilator. Maximum operating pressure 2.5kg / cm2. Factory tests are done at 10bar!

aster.jpgFilters ASTER

Main body of gray-beige glossy polyester and fiberglass, with new pompom lid and polypropylene base. With pressure gauge, drain valve and blower. Maximum filtration speed 50m3 / h / m2. Maximum operating pressure 2.5kg / cm2.

cartridge.jpgCartridges TERRA series filters

Made of PP and fiberglass. With pressure gauge and ventilator. High filtration efficiency. Easy maintenance. Filtration speed 1.8m3 / h / m2. Maximum operating pressure 2.5kg / cm2.

polyvana-xeirokiniti.jpgManual Multivalve

Manual multivalve in dimensions 1 1/2 ”, 2” and 2 1/2 ”.

polyvana_auto.jpgAutomatic Multivalve

Automatic fountain with which is provided a keyboard with buttons for its operation. Controls filtration, washing, rinsing and emptying.

skimmer-standard.jpgSkimmer with standard neck

Available with round and square lid.

skimmer-wide.jpgSkimmer with wide neck

Available in white and light blue, with round and square lid.

freatio-pythmena.jpgBottom well

Round bottom well 270mm, with ABS grate, connection 2 “internal for pressure test, connection 1 1/2” from below for testing or installation of hydrostatic valve and suction pipe. Maximum flow 13m3 / h.

stomia-multiflow.jpgReturn nozzles

skala-standard.jpgStandard stairs

Ladder width 500mm. With handles made of stainless steel tube Φ43mm glossy. Stairs made of Inox or plastic. Its perfect design ensures non-slip protection. Includes installation and customization components.

skala-standard.jpgStairs Muro

Ladder width 500mm. Handles made of glossy tube Φ43mm inox. Stairs in stainless steel and plastic. Its perfect design ensures non-slip protection. Includes installation and customization components.

skala-yperxeilisis.jpgOverflow ladder

A new feature of this ladder is the curve in the handle, which gives a more modern look. Stairs with a width of 500mm made based on the European standards EN 13451-1 and EN 13451-2. Easy installation. Can be combined with a non-slip safety step with double surface.

vatiras-dolphin.jpgSpringboard Dolphin

Flexible board made of polyester and fiberglass in light blue color with support components.

vatiras-ballesta.jpgSpringboard Ballesta

Polyester board and fiberglass in light blue color with galvanized metal base and support accessories.

sxara-flexible.jpgFlexible grille for curves

Made of polypropylene, specially designed to protect against UV rays. It is formed by joining individual pieces (45 pieces per meter).

sxara-asfaleias-flex.jpgSafety grille

Made of polypropylene, specially formulated for UV protection. According to the standard EN 1345-1 (8mm). It is formed by joining individual pieces (45 pieces per meter).

It consists of LED light, remote control, receiver and transformer provided separately. The LED light incorporates maximum brightness (1W) leds in red, blue and green. The combination of these basic colors gives 12 different colors all very bright and vibrant. For newly constructed pools, either concrete or prefabricated, you can choose between the standard model that includes a nest and the flat model that does not need a nest for installation. For an existing installation it is not necessary to change the transformer or the wiring, the existing nest can be reused by changing only the conventional lamp with the LED lamp in both types of pool (concrete – prefabricated). LEDs have a lifespan of 100,000 hours compared to 1,000 hours of conventional bulbs and each light consumes only 60W. Remote control is optional. Operation can be done with buttons only. The mini light (mini led) is small for stairs and spas. It has 12 colors and 9 color change programs.

lumiplas.jpgLumiPlus

The LumiPlus PAR 56 series is the new series of LEDs, classic ASTRAL luminaire with PAR 56 lamp. High brightness LED lights, 27x1W luxeon. Compatible with all PAR 56 lights on the market. Also available in Greek type luminaire (19 cm).

jelly_led1.jpgJelly Led

The new generation LED can be placed in a classic ASTRAL nest, in the classic way. Another patent of ASTRAL, where the luminaire becomes almost invisible and can illuminate 180 degrees !!!

standard.jpgStandard lights

With nest for installation on the walls of the pool made of concrete or prefabricated. Made of plastic PS. Halogen lamp PAR 56 300W-12V. The nest gives the alternative, the cable to pass from the side or from below, with M-25 thread. Available with white or stainless steel front.

extra_flat.jpgExtra Flat lights

Made of heat-resistant plastic material. No nest needed for installation. Facade in white ABS or stainless steel. It is fixed to the wall with a reinforced plastic mesh, caps and screws. Available with halogen lamp 100W-12V.

fakoi.jpgColored crystals

Colored crystals for standard and extra flat lighting.

fiber_optic.jpgOptical fiber

Fiber optic lighting consists of a generator and a fiber optic cable. The generator provides the ability to switch colors automatically or via remote control. 8 colors available.

metasximatistes.jpgTransformers

Transformers made according to EN 60742.

feeder.jpgTablet chlorine

Made of ABS. It is installed by bypass, has manual cleaning, automatic venturi system and opening key.

electrolysis.jpgElectrolysis system

Self-cleaning reverse polarity chloride. Salt concentration 4gr / l. Flow switch and ground electrode included. Informs when salt should be added. From the best company for the production of electronic boards.

control_basic.jpgPH or REDOX regulator – dosing pump

Controls and doses ph- / ph + or Cl. The device provides absolute accuracy and reliability thanks to the top quality of the components. Necessary for every pool up to 200m3.

ozone.jpgOzone Device

Ozone is the most powerful disinfectant available and is also used to disinfect pool water. It can be used alone or in combination with other ways of chlorination. Designed to be used in spas and swimming pools up to 200m3. This device is extremely small, simple to install and offers easy maintenance.

uv.jpgUV System

The UV system works with high efficiency and low pressure lamps (8000h life time). Maximum water temperature 40oC.

heat-pump.jpgAIR ENERGY heat pump

thermometer.jpgThermometer

Thermometer floating in the pool

bubble.jpgBubble cover

Cover with bubbles in blue color that chooses in the water and does not need supports.

ultra-thermal.jpgUltra thermal cover with bubbles

Thermal cover with bubbles in blue and gold color. It is recommended to use the roller for easy picking and storage. The thermal cover is considered essential for any outdoor private pool and we achieve 17-20% better efficiency when there is a heating system.

roller.jpgWrapping mechanism

Wrapping mechanism for easy collection and storage of covers.

above-ground.jpgOverhead automatic cover

The above ground automatic cover is ideal for installation in existing swimming pools, whose dimensions do not exceed 6x12m. The shaft is placed on the edge of the pool.

upovruxio-auto.jpgUnderwater automatic cover

The underwater hood works with an engine mounted in a separate area, while the shaft and hood are permanently submerged in water at one end of the pool.

solar-cover.jpgOverground solar cover

The solar panel is powered by solar energy and is absolutely environmentally friendly. The cover reduces evaporation and heat loss. It is certified according to the standards NF 90-308 and guarantees superior quality reducing the possibility of accidents in the pool.

telescopic.jpgTelescopic cover

Telescopic cover for the full coverage of the pool and its conversion into an indoor pool. Ideal solution for pool use in winter in combination with a pool heating system.

The new automatic cleaner for private pools. Elegant and with an exceptional design (awarded with red dot award 2011), the Max 3 removes dirt from the bottom of the pool thanks to the smart electronic management and the effective “max scrubber” system that scrubs the dirt and removes it from any surface. It is characterized by excellent ergonomics, reduced weight and removable filters from the top and greater ease of cleaning. Transparent covers allow us to see when the filters need cleaning. It operates in a 2.5 hour program and has a 18 meter floating cable.

The new automatic cleaner for private pools. Stylish and with an exceptional design (awarded with red dot award 2011), the Max 5 removes dirt from the pool bottom and walls thanks to smart electronic management and the efficient “max scrubber” system that scrubs dirt and removes dirt any surface. It is characterized by excellent ergonomics, reduced weight and removable filters from the top and greater ease of cleaning. Transparent covers allow us to see when the filters need cleaning. It operates in a 3-hour program and has a 18 meter floating cable.

The automatic cleaner Pulit Advance 3 removes all the dirt from the bottom of the pool in record time, thanks to the electronic system Aquasmart and the efficient cleaning brush that with the vibrating system rubs the dirt from any kind of surface. The filters are accessible from the top of the machine, offering excellent ergonomics and ease of cleaning the filters. It has a cable 18 meters long and height-adjustable suction ports for perfect adaptation to any environment. It works in programs of 1.5 – 2 hours and has an LED indicator that warns of the need to clean the filters.

The Pulit Advance 5 automatic cleaner removes all dirt from the bottom and walls of the pool in record time, thanks to the Aquasmart electronic system and the efficient cleaning brush that scrubs dirt from any surface with the vibrating system. The filters are accessible from the top of the machine, offering excellent ergonomics and ease of cleaning the filters. It has a cable 18 meters long and height-adjustable suction ports for perfect adaptation to any environment. It works in programs of 1.5 – 2 hours and has an LED indicator that warns of the need to clean the filters.

upovruxio-auto.jpgUnderwater automatic cover

The above ground automatic cover is ideal for installation in existing swimming pools, whose dimensions do not exceed 6x12m. The shaft is placed on the edge of the pool.